Panasonic DLP PT-52DL52 Service Manual page 41

6. Using Volume up/down button, adjust so that the data shown on
top right of the screen become 10.
7. Select HD/PC (PR-G).
8. Using Volume up/down button, adjust so that the data shown on
top right of the screen become E8 (±5).
9. Input a SVGA60 black raster signal.
10. Select HD/PC (PR-OF).
11. Using Volume up/down button, adjust so that the data shown on
top right of the screen become 10.
12. Select HD/PC (PB-G).
13. Using Volume up/down button, adjust so that the data shown on
top right of the screen become E8 (±5).
14. Input a SVGA60 black raster signal.
15. Select HD/PC (PB-OF).
16. Using Volume up/down button, adjust so that the data shown on
top right of the screen become 10.
9.7.3. HD adjustment
Condition: In the dark room
1. Input a black pattern (1080i) signal.
2. Select HD/PC (PB-OF).
3. While watching the screen, using Volume up/down button, adjust
so that the screen become a blackest.
4. Select HD/PC (PR-OF).
5. While watching the screen, using Volume up/down button, adjust
so that the screen become a blackest.
6. Select HD/PC (GY-OF).
7. While watching the screen, using Volume up/down button, adjust
so that the noise become a decrease most.
9.8. CW index delay adjustment
41