HP Compaq dx2000 MT Supplementary Manual page 12

Computer Setup (F10) Utility
Computer Setup (Continued)
Heading
Peripheral Setup
(Continued)
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
8
Option
USB 1.1 Device Legacy
Support
OnBoard Serial Port
OnBoard Parallel Port
Parallel Port Mode
Description
Sets the USB 1.1 Device Legacy Support
under DOS Mode.
• Disable: USB 1.1 Device Legacy
Support disabled
• No Mice: A mouse is not supported
• All Device: All devices are supported
Sets the OnBoard Serial PortA settings
• Auto (Default)
• Disable
• 3F8/COM1
• 2F8/COM2
• 3E8/COM3
• 2E8/COM4
Sets the OnBoard Parallel Port settings
• Auto (Default)
• Disable
• 378
• 278
Allows you to set the Parallel Port mode.
• SPP (Bi-Dir)
• SPP and EPP-1.9
• ECP
• ECP and EPP-1.9 (Default)
Computer Setup Utility Guide