Installing An Expansion Card - HP Compaq dx2000 MT Hardware Reference Manual

Hardware Upgrades
✎

Installing an Expansion Card

1–10
5. Open both latches of the memory module socket 1, and insert the
memory module into the socket 2. Begin by installing a module
into the socket nearest the preinstalled module, and install the
modules following the numerical order of the sockets.
Installing a Memory Module
A memory module can be installed in only one way. Match the notch
on the module with the tab on the memory socket.
6. Push the module down into the socket, ensuring that the module
is fully inserted and properly seated. Make sure the latches are in
the closed position 3.
7. Repeat steps 5 and 6 for any additional modules that you want to
install.
To reassemble the computer, reverse the removal procedure.
1. Turn off the computer properly through the operating system and
turn off any external devices.
Hardware Reference Guide