Setting The On Or Off Timer - Samsung AM KNTD Series User Manual

Setting the On or Off timer

You can set the air conditioner to be turned on or off automatically at the desired time.
Remote control display
Select the mode in the following order: (Auto)
(Heat).
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto, Cool, Dry, and Heat modes. In Fan
mode, the temperature cannot be adjusted.
NOTE
• When On timer setting is completed, the setting will be displayed for 3 seconds, and then only the (On)
indicator will remain on the remote control display.
• You cannot set the Fan speed when setting the On timer.
IB_EN_DB68-06428A.indd 19
Setting the On timer
When the air conditioner is turned off:
1. Press the
• The (On) indicator will keep blinking and you can set the time.
2. Press the
• You can set the time in half hour intervals from 30 minutes (0.5
on the display) to 3 in hour intervals from 3 to 24 hours.
• The time can be set from minimum 30 minutes to maximum
24 hours.
3. Press the
• The (On) indicator and the set time of the timer will be
displayed on the remote control display.
• On timer setting will be cancelled if you don't press the
button within 10 seconds after setting the time. Therefore,
check for the (On) indicator on the remote control display.
Press the
Cancel
the
press the
Additional options available in the On timer
button to select (On).
or button to set the time.
button to complete the On timer setting.
▶
button select (On)
▶
or button set the timer to
button
▶ ▶ ▶
(Cool) (Dry)
▶
press
▶
▶
(Fan) and
English
19
9/19/2016 2:13:03 PM