Hp Insight Diagnostics - HP Compaq dc7900 USDT Quick Setup And Getting Started Manual

HP Backup and Recovery Manager is preinstalled on the C: drive and creates a
Recovery Partition.
Recovery Points and file backups can be copied to CD or DVD discs, while all
backups can be copied to network or secondary hard disks.
HP highly recommends that you create a Recovery Disc Set immediately before
using the computer and schedule regular automatic Recovery Point backups.
To create the Recovery Disc Set:
1. Click Start > HP Backup and Recovery > HP Backup and Recovery
Manager to open the Backup and Recovery Wizard, then click Next.
2. Select Create a set of recovery discs (Recommended) and click Next.
3. Follow the instructions in the wizard.
For more information on using HP Backup and Recovery Manager, refer to the
HP Backup and Recovery Manager User Guide by selecting Start > HP Backup
and Recovery > HP Backup and Recovery Manager Manual.
NOTE: You can order a Recovery Disc Set from HP by calling the HP support
center. Go to the following Web site, select your region, and click the Technical
support after you buy link under the Call HP heading to obtain the support center
telephone number for your region.
http://welcome.hp.com/country/us/en/wwcontact_us.html

HP Insight Diagnostics

NOTE: HP Insight Diagnostics is included on CD with some computer models
only.
The HP Insight Diagnostics utility allows you to view information about the hardware
configuration of the computer and perform hardware diagnostic tests on the
subsystems of the computer. The utility simplifies the process of effectively
identifying, diagnosing, and isolating hardware issues.
The Survey tab is displayed when you invoke HP Insight Diagnostics. This tab
shows the current configuration of the computer. From the Survey tab, there is
access to several categories of information about the computer. Other tabs provide
additional information, including diagnostic test options and test results. The
information in each screen of the utility can be saved as an html file and stored on
a diskette or USB flash drive.
Use HP Insight Diagnostics to determine if all the devices installed on the computer
are recognized by the system and functioning properly. Running tests is optional
but recommended after installing or connecting a new device.
You should run tests, save the test results, and print them so that you have printed
reports available before placing a call to the Customer Support Center.
ENWW
HP Insight Diagnostics
3