Usb Cable Data - HP Compaq dc7800 Series Technical Reference Manual

Input/Output Interfaces
Pin
1
2

5.8.2 USB Cable Data

The recommended cable length between the host and the USB device should be no longer than
sixteen feet for full-channel (12 MB/s) operation, depending on cable specification (see
following table).
Conductor Size
20 AWG
22 AWG
24 AWG
26 AWG
28 AWG
NOTE:
For sub-channel (1.5 MB/s) operation and/or when using sub-standard cable shorter lengths may be
allowable and/or necessary.
The shield, chassis ground, and power ground should be tied together at the host end but left
unconnected at the device end to avoid ground loops.
Signal
Data +
Data -
Vcc
Ground
5-12
Signal Description
Vcc +5 VDC
USB- Data (minus)
Table 5-9.
USB Cable Length Data
Resistance
0.036 Ω
0.057 Ω
0.091 Ω
0.145 Ω
0.232 Ω
Table 5-10.
USB Color Code
Insulation color
Green
White
Red
Black
Table 5-8.
USB Connector Pinout
Pin Signal
3 USB+
4 GND
Maximum Length
16.4 ft (5.00 m)
9.94 ft (3.03 m)
6.82 ft (2.08 m)
4.30 ft (1.31 m)
2.66 ft (0.81 m)
www.hp.com
Description
Data (plus)
Ground
Technical Reference Guide