Table of Contents
Advertisement
Storing manually
1
While receiving the station that you want to
store, press and hold the desired preset
number.
Receiving stored stations
1
Select the band, then touch the desired
preset number.
Using Tuner Option Functions
The following functions are available by touching
.
BTM
Stores stations in order of frequency on the
preset numbers. 18 stations can be stored for FM
and 12 stations for AM as preset stations.
Local
Select [ON] to tune only to stations with strong
signals. To tune normally, select [OFF].
AF*
Select [ON] to continuously retune the station to
the strongest signal in a network.
TA*
Select [ON] to receive current traffic information
or traffic programs (TP) if available.
Regional*
Select [ON] to stay with the station you are
receiving while the AF function is set to on. If you
leave this regional program's reception area,
select [OFF]. This function does not work in the
UK and some other areas.
PTY*
Select a program type from the PTY List to search
for a station broadcasting the selected program
type.
* Only available during FM reception.
To receive emergency announcements
With the AF or TA function on, emergency
announcements will automatically interrupt the
currently selected source.
Listening to the DAB/DAB+ Radio
To listen to the DAB/DAB+ radio, press HOME then
touch [DAB+].
Tips
• Set [Antenna Power] to [ON] (default) or [OFF] depending
on the type of DAB antenna (aerial) (not supplied)
(page 10).
• When [DAB+] is selected for the first time after performing
the factory reset, the auto tune starts automatically. Allow
the auto tune to finish. (If interrupted, the auto tune will
start again the next time you select [DAB+].) If no DAB
station is stored by the auto tune, tune by touching [Auto
Tune] of
(list).
Reception controls/indications
(list)
Open the station list.
Station group name, station name
(DAB Options)
Open the DAB Options menu.
SEEK–/SEEK+
Search for stations.
/
Search for station groups.
Preset numbers
Select a preset station. Swipe right/left to show
the other preset stations.
Touch and hold to store the current station in
that preset.
Searching for a station manually
1
Touch SEEK +/– to search for a station; touch
/ to search for different station groups.
Scanning stops when the unit receives a station/
station group. Search until the desired station is
received.
Storing a station manually
1
While receiving the station that you want to
store, touch and hold the desired preset
number.
9
GB
Advertisement
Table of Contents
