Partitioning And Formatting A Multibay Hard Drive - HP Compaq dc7100 DT Getting Started Manual

Getting Started
If the device does not start, ensure that the necessary device
drivers are installed on the system. If they are not available, they
may be downloaded, at no cost, from the HP Web site at
www.hp.com
drivers and software, enter the model number of the computer,
and press
Partitioning and Formatting a MultiBay
Hard Drive
✎
You must be logged on as an administrator or a member of the
Administrators group in order to complete this procedure.
1. Exit all software applications, shut down the operating
system software, and turn off the computer.
2. Insert the hard drive into the MultiBay. Refer to
Drive into the MultiBay" on page 14
3. Turn on the computer.
4. Click Start.
5. Right-click My Computer, then click Manage.
6. Click Storage, then double-click Disk Management.
7. Right-click the MultiBay hard drive, then click Partition.
Carefully read and respond to any prompts that appear on the
screen.
Refer to the online Help (click Action > Help) for additional
information.
16
. Click support & drivers, select Download
Enter.
www.hp.com
"Inserting a
for more information.
Getting Started