Rear Panel Components - HP Compaq dc5750 MT Hardware Reference Manual

Rear Panel Components

Table 1-2 Rear Panel Components
1 Power Cord Connector
2 Voltage Select Switch
3 PS/2 Mouse Connector (green)
4 PS/2 Keyboard Connector (purple)
5 Universal Serial Bus (USB)
6 Serial Connector
NOTE
The monitor connector on the system board is inactive when a PCI Express graphics card is installed in the
computer. The integrated graphics can be enabled if a graphics card based on an ATI graphics controller is
plugged into the PCIe x16 slot.
If a PCI graphics card is installed, the connectors on the card and the system board may be used at the same
time. Some settings may need to be changed in Computer Setup to use both connectors. For information
about Boot Order, refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics
CD.
The DVI-D connector will only work with display devices that have DVI input.
The Line-In and Line-Out audio connectors can be "retasked" to work as either Line-In, Line-Out, or
Microphone connectors by clicking the Realtek HD Audio Manager icon (a red speaker) in the task tray or
the Realtek entry in the operating system's Control Panel and selecting the Retasking Enable option.
ENWW
Arrangement and number of connectors may vary by model.
7 RJ-45 Network Connector
8 Parallel Connector
9 Monitor Connector
10 Line-Out Connector for powered audio
devices (green)
11 Line-In Audio Connector (blue)
12 Digital Video Interface (DVI-D) Monitor
Connector
Rear Panel Components 3