Download Print this page

Baby Trend WK14 C Series Instruction Manual page 6

Activity walker
Hide thumbs Also See for WK14 C Series:

Advertisement

ASSEMBLY ASAMBLEA
TO ASSEMBLE WALKER
PARA ENSAMBLAR EL ANDADOR
1)
• To open the baby walker raise the
tray to the middle position (Fig. 1).
• Para abrir el andador, levante la bandeja
hasta la posición intermedia (Fig. 1).
2)
• The baby walker can be used for
3 different heights. Turn the safety
button and slide vertically to adjust
the height. See the 3 heights diagram
under the walker for indications of
the height being used (Fig. 2).
• El andador para bebés puede utilizarse
en tres alturas diferentes. Gire el botón
de seguridad y deslice verticalmente para
ajustar la altura. Consulte el diagrama de
3 alturas debajo de la andadora para ver
las indicaciones de la altura que se esta
usando (Fig. 2).
3)
• Check that the safety button is turned 90
degrees to prevent the accidental release
of the mechanism (Fig. 3).
• Verifique que el botón de seguridad esté
a 90 grados para evitar que el mecanismo
se suelte accidentalmente (Fig. 3).
9
9
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
4)
Fig. 1
X
X
Fig. 2
Fig. 3
ASSEMBLY ASAMBLEA
• Attach the fabric nearest to the tray, push
the pins downward through the fabric into
to the holes of the frame until its snaps
into place. Repeat for the opposite side
(Fig. 4a).
• Insert the pins on the back of the seat,
into the holes by pushing downwards until
it clicks (Fig. 4b).
• Lastly, insert the pins into the holes
behind the tray, by pushing downwards
until it clicks (Fig. 4c).
NOTE: All pins should be aligned to the
corresponding holes of the frame and
click into place to ensure the fabric is
securely attached.
• Insert the Push Handle into the frame.
Push in firmly until it clicks into position.
NOTE: Do Not lift the walker from the
Push Handle (Fig. 4d).
• Coloque la tela más cercana a la
bandeja, empuje los pasadores hacia
abajo a través de la tela hasta los orificios
del marco hasta que encaje en su lugar.
Repita para el lado opuesto (Fig. 4a).
• Inserte los pasadores en la parte
posterior del asiento, en los orificios
empujando hacia abajo hasta que haga
clic (Fig. 4b).
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig.4a
Fig.4b
Fig. 4c
10

Advertisement

loading

This manual is also suitable for:

Trend 4.0