Diskette Drive Bezel; Installing Additional Memory - HP Compaq d220 MT Hardware Reference Manual

Hardware Upgrades

Diskette Drive Bezel

Installing Additional Memory

1–6
Pull the right retaining tab towards the center of the main bezel. At
the same time, pull the bezel inwards to remove it from the main
bezel.
Removing the Bezel Blank
To install a diskette drive bezel, reverse the removal procedure.
The computer comes with Double Data Rate-Synchronous Dynamic
Random Access Memory (DDR-SDRAM) Dual Inline Memory
Modules (DIMMs).
The memory sockets on the system board can be populated with
industry-standard DIMMs. These memory module slots are populated
with at least one preinstalled memory module. To achieve the
maximum memory support, you may be required to replace the
preinstalled DIMM with a higher capacity DIMM.
Hardware Reference Guide