Storage And Parking Safety Instructions And Practices; Concluding Safety Instructions And Practices - Bush Hog XLRR819-I Operator's Manual

Bush Hog products are designed utilizing specifically matched system components to ensure optimum
equipment performance. These parts are made and tested to Bush Hog specifications. Non-genuine "will fit"
parts do not consistently meet these specifications. The use of "will fit" parts may reduce equipment
performance, void warranties, and present a safety hazard. Use genuine Bush Hog parts for economy and
safety.
(SPBH-2)

Storage and Parking Safety Instructions and Practices

A rear Implement can fall if not properly supported. Always use the stand on the front hitch
(if equipped) or block up securely to prevent falling and possible crushing injury and/or
other injury from holding or lifting heavy components. Use the stand to stabilize the
implement during storage.

Concluding Safety Instructions and Practices

In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer
also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and
Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.
XLRR-I 05/21
© 2021 Alamo Group Inc.
SAFETY
PARTS INFORMATION
SEE YOUR BUSH HOG DEALER
(S3PT-3)
Safety Section 1-12
(SG-18)