Table of Contents
Advertisement
5
Slide the movable edge guide to the left side.
Squeeze the blue lever to move the edge guide.
6
Pull the paper along the right edge guide.
7
Place your hand on the paper to flatten it, and
slide the movable edge guide against the
paper.
CAUTION
If the movable edge guide is not properly
slided against the paper, print position may
become incorrect or a paper jam may occur.
Make sure to follow the guidelines below.
There should be no gap between the guide
and the paper edge.
Do not slide the guide against the paper too
tightly.
8
Load the paper to the paper feed slot until
paper feeding starts automatically.
Do not load backing paper that has no labels on it. The
paper may not be detected and not be fed
automatically.
9
Close the paper cover.
Basic Operation
43
Advertisement
Table of Contents
