Advertisement
ProCurve Gigabit 1000Base-T Mini-GBIC (J8177B)
A small form-factor pluggable (SFP) gigabit copper
transceiver that provides a full-duplex gigabit solution
up to 100 meters on Category 5 or better cable.
© 2007 Hewlett-Packard Development Company, L.P. The information contained herein is
subject to change without notice. The only warranties for HP products and services are set
forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be
liable for technical or editorial errors or omissions contained herein.
9/28/2007
To learn more, visit www.procurve.com
Information is subject to change without notice
Ports
1 RJ-45 1000Base-T port (IEEE 802.3ab
Type 1000Base-T)
Duplex: full only
Physical characteristics
Dimensions: 2.71(d) x 0.54(w) x 0.55(h)
in. (6.88 x 1.37 x 1.4 cm)
Weight: .06 lb. (0.03 kg)
Cabling
Type:
• 1000Base-T: Category 5 (5E or better
recommended), 100 Ω differential 4-pair
unshielded twisted pair (UTP) or shielded
twisted pair (STP) balanced, complying
with IEEE 802.3ab 1000Base-T
Maximum distance:
• 100 m
Notes
When used in the ProCurve Switch gl
20-Port 10/100/1000 Module (J4908A),
the J8177B mini-GBIC can be installed in
either the upper or lower mini-GBIC port,
but will block access to the other port.
See the document titled "Support for the
J8177B 1000Base-T Mini-GBIC", on the
"ProCurve Mini-GBICs and SFPs" Manuals
Web page, for supported platforms and
minimum software requirements to
support this product.
The J8177B gigabit copper mini-GBIC is
not supported on dual-personality ports.
Advertisement
