Installing The Switch; Included Parts - HP ProCurve 3400cl-48G Installation And Getting Started Manual

Installing the Switch

The ProCurve Series 3400cl Switch devices come with an accessory kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack,
in an equipment cabinet, and with rubber feet that can be attached so the
switch can be securely located on a horizontal surface. The brackets are
designed to allow mounting the switch in a variety of locations and orienta-
tions. This chapter shows how to install the switch.

Included Parts

The Series 3400cl Switch devices have the following components shipped with
them:
ProCurve Series 3400cl Switch Installation and Getting Started Guide,
this manual
ProCurve Product Documentation CD ROM
(contains PDF file copies of the documentation for the Series 3400cl
Switch devices, including the Management and Configuration Guide,
and for most other ProCurve switches)
ProCurve Manager - CD ROM and booklet
Read Me First
Customer Support/Warranty booklet
Console cable
Accessory kits
(5064-2085) for Switch
3400cl-24G
two mounting brackets
four 8-mm M4 screws to attach the mounting
brackets to the switch
four 5/8-inch number 12-24 screws to attach
the switch to a rack
four rubber feet
* These mounting brackets differ from the 5064-2085 mounting brackets by being longer to
support the increased depth of the 3400cl-48G product (compared to the 3400cl-24G).
(5069-5705) for Switch
3400cl-48G
two mounting brackets*
eight 8-mm M4 screws to attach the
mounting brackets to the switch
four 5/8-inch number 12-24 screws to
attach the switch to a rack
four rubber feet
2
2-1