Table of Contents
Advertisement
Module
Gigabit-LX Module
100/1000Base-T Module
RJ-45 port with
"Auto MDI/MDI-X"
Note: In the module's default configuration, Auto, either a straight-through or crossover cable can be used to connect
the module to either another Gigabit device or to a 100Base-T device. See the Note on page 9.
10Base-FL Module
single mode
or multimode
fiber-optic cable
with SC connectors
UTP cable with
RJ-45 connector
multimode fiber-optic
cable with
ST connectors
Cable Type
single mode fiber-optic
cables that are fitted with
SC connectors
62.5/125 ←m or 50/125 ←m
core/cladding diameter
graded-index, multimode
fiber-optic cables may
also be usable, but a mode
conditioning patch cord
may be needed. See
"Mode Conditioning
Patch Cord" on page 13.
100 Mbps operation:
category 5, 100-ohm UTP
cable
1000 Mbps (Gigabit)
operation: category 5E,
100-ohm UTP cable is
recommended, although
category 5 cable may also
work.
62.5/125 ←m or 50/125 ←m
core/cladding diameter,
graded-index, multimode
fiber-optic cables that are
fitted with ST connectors
Installing the Module
Maximum Length
5 kilometers
550 meters
100 meters
100 meters
1 kilometer
11
Advertisement
Table of Contents
