Table of Contents
Advertisement
Chapter 4
•
PPP Username/Password
your ISP. These fields are case-sensitive.
•
Authentication Type
CHAP and MS-CHAP.
•
Addressing Type
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
•
MTU(Bytes)
•
Enable MLD Proxy
function if you need.
•
Use IPv6 address specified by ISP
•
Set IPv6 DNS Server manually
and secondary IPv6 DNS server.
Tunnel 6to4
•
WAN Connection
5
Click Save.
4 14 3
IPv6 LAN
1
Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2
Go to
IPv6
>
IPv6
- Enter the user name and password provided by
– Choose one authentication type from AUTO-AUTH, PAP,
- There are two types of assignation for IPv6 address:
- 1480 as default, do not change unless necessary.
- Enable the Multicast Listener Discovery (MLD) Proxy
- Enter the IP address of the IPv6 DNS server
- Display the available WAN connection.
LAN.
- Input a static IPv6 address from the ISP.
Configure the Router
57
Advertisement
Table of Contents
