Dolby Digital / Dts / Mpeg; Sample Freq. (Frequency); 5.1 Speaker Setup; Dynamic Range Control (Drc) - LG DK487 Owner's Manual

Dolby Digital / DTS / MPEG

Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM: Select when connected to a two-channel
digital stereo amplifier. DVDs encoded in Dolby
Digital, DTS or MPEG will be automatically
downmixed to two-channel PCM audio.

Sample Freq. (Frequency)

If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any 96
kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without
any further processing.
Check the documentation for your amplifier to verify its
capabilities.
DVD-V

5.1 Speaker Setup

Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See "Speaker Settings", page 27.)

Dynamic Range Control (DRC)

With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
14
DVD-V DVD-A
DVD-V DVD-A
DVD-A
DVD-V DVD-A

OTHERS

The PBC, Auto Play and B.L.E. settings can be
changed.
OTHERS

PBC

Auto Play

B.L.E.
PBC
VCD
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played the same
way as Audio CDs.
DVD-V
Auto Play
You can set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Notes:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your
preference and monitor's ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Note:
The B.L.E. function works NTSC system only.
On
Off
On
Move Select
DVD-V VCD