Viewscale - ViewSonic XG340C-2K User Manual

ViewScale

Under ViewScale, users can adjust their current aspect ratio to fit their specific
usage scenario. Below are the listed aspect ratios.
NOTE: If users choose a ViewScale aspect mode that is not native, it may impact
the user's experience.
To enable ViewScale:
1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen
Display (OSD) Menu.
2. Move the joy key [◄] or [►] to select Display. Then move the joy key [▼] to
enter the Display menu.
3. Move the joy key [▲] or [▼] to select Image Adjust Then move the joy key [►] to
enter its sub-menu.
4. Move the joy key [▲] or [▼] to select ViewScale. Then move the joy key [►] to
enter its sub-menu.
5. Move the joy key [▲] or [▼] to select your preferred aspect ratio. Then press the
[●] key to confirm the selection.
Aspect Ratio
Full
Aspect
1:1
19" (4:3)
19"W (16:10)
21.5" (16:9)
22"W (16:10)
23.6"W (16:9)
24"W (16:9)
Scales the inputted image to fill the screen, this is the default
input choice and is ideal for 16:9 images.
The inputted image is allowed to fill the screen as large as it
can go without image distortion.
The image is directly displayed without scaling.
Simulates the inputted image in a 4:3 aspect ratio and 19"
display size.
Simulates the inputted image in a 16:10 aspect ratio and 19"W
display size.
Simulates the inputted image in a 16:9 aspect ratio and 21.5"
display size.
Simulates the inputted image in a 16:10 aspect ratio and 22"W
display size.
Simulates the inputted image in a 16:9 aspect ratio and
23.6"W display size.
Simulates the inputted image in a 16:9 aspect ratio and 24"W
display size.
Description
59