MSI A68HM-P33 Series Manual page 29

▶ Setup Software P-state limit
Enables or disables P-state limit which is a ceiling on the amount of performance
and power that a processor may utilize. Enabling this function will also decrease the
processor temperature. If set to "Auto", BIOS will set it automatically.
▶ CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than
needs to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
▶ OC Retry Count
When overclocking has failed, setting this item will allow system to reboot specified
number of times with the same overclocked configuration. If overclocking has failed
every time, the system will restore the defaults.
[1], [2], [3] Retry 1,2,3 times.
[Disabled] Disables this function and keeps the current BIOS settings.
▶ CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows what the key
features does the installed CPU support. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time
by pressing [F5].
▶ DIMM1~X Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
▶ CPU Features
Press <Enter> to enter the sub-menu.
▶ AMD Cool'n'Quiet [Auto]
Enabled or disabled AMD Cool'n'Quiet function.
[Auto]
[Enable]
[Disabled]
Depends on AMD Design.
Enables AMD Cool'n'Quiet function. The Cool'n'Quiet
technology can effectively and dynamically lower CPU speed
and power consumption.
Disables this function.
29