Specifications - Sony MHC-EC619iP Operating Instructions Manual

On the speaker system
This speaker system is not
magnetically shielded, and the
picture on nearby TV sets may
become magnetically distorted. In this
situation, turn off the TV, wait 15 to
30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Cleaning the cabinet
Clean this system with a soft cloth
slightly moistened with a mild
detergent solution. Do not use any
type of abrasive pad, scouring powder,
or solvent, such as thinner, benzine, or
alcohol.

Specifications

Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
With 8 ohms loads, both channels
driven, from 120  10,000 Hz; rated
26 watts per channel minimum
RMS power, with no more than
0.7% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
U.S. model:
Output power (reference):
60 W + 60 W (per channel at
8 ohms, 1 kHz)
Other models:
Power output (rated):
30 W + 30 W (at 8 ohms, 1 kHz, 1%
THD)
Output power (reference):
60 W + 60 W (per channel at
8 ohms, 1 kHz)
Outputs
SPEAKERS: Accepts impedance of
8 ohms
CD player section
System: Compact disc and digital audio
system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
* This output is the value
measurement at a distance of
200mm from the objective lens
surface on the Optical Pick-up Block
with 7mm aperture.
Tuner section
FM stereo, FM superheterodyne tuner
Antenna: FM lead antenna
Tuning range:
North American model: 87.5 MHz 
108.0 MHz (100 kHz step)
Other models: 87.5 MHz 
108.0 MHz (50 kHz step)
29
GB