Knob Set List - Casio PX-S3100BK User Manual

Reference

Knob Set List

Knob Set
No.
(displayed)
1 Filter Cut Off Frequency
2 Brilliance/Rev Brilliance
3 Up1 Cho/Rev Chorus Send
4 Amp Envelope Attack Time
5 Vibrato Vibrato Rate
6 Delay Vibrato Delay Vibrato Time
7 Porta./Mod. Portamento Time
8 Layer Modify Layer Volume Balance
9 Layer Panning Upper1 Pan
10 Lower Modify Lower Volume
11 Kbd Cho/Rev Keyboard Chorus Send
12 Kbd/Acmp Vol. Keyboard Volume
13 Kbd/Song Vol. Keyboard Volume
2
14 DSP Param.* DSP Parameter 1
*1 Names of parameters included in the
with the knobs to be replaced when a registration function setup is recalled, select "On" as the settings of the FUNCTION
parameters in this column (Knob: 60, Effect: 64, Tone: 70, Accompaniment: 69).
For information about FUNCTION parameters, see
*2 The parameters affected by this knob set are two parameters that are automatically selected as being the most applicable to the
currently selected DSP
selected DSP. For example, when preset DSP "15. Auto Pan" is selected, DSP Parameter 1 is LFO Rate, and DSP Parameter
2 is Manual.
EN-78
(K1) knob
Parameter
58 "FREEZE" directory
("Using a DSP", page EN-23). DSP Parameter 1 and DSP Parameter 2 are fixed according to the
Freeze* 1 Parameter
Knob Resonance
Effect Reverb Send
Effect Reverb Send
Knob Release Time
Knob Vibrato Depth
Knob Vibrato Depth
Knob Modulation Depth
Tone Upper2 Fine Tune
Knob Upper2 Pan
Tone Lower Pan
Effect Keyboard Reverb Send
Tone Accompaniment Volume
Tone Song Volume
Tone DSP Parameter 2
("Freeze Function", page EN-42). If you do not want settings made
"Configuring Function Settings (FUNCTION
(K2) knob
Freeze* 1
Knob
Knob
Sound Mode
Knob
Knob
Knob
Knob
Knob
Knob
Knob
Sound Mode
Accompaniment Upper1, Upper2,
–
Tone
Mode)" (page EN-53).
Applicable Part
Upper1
Upper1
Upper1
Upper1
Upper1
Upper1
Upper1
Upper1, Upper2
Upper1, Upper2
Lower
Upper1, Upper2,
Lower
Lower
Upper1, Upper2,
Lower
Upper1