Table of Contents
Advertisement
* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Description
Of
No Link
Blinking
Data Activity
On
Link
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Front Speaker
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the
front panel audio header. Ater restarting your computer, you will ind the "Mixer"
tool on your system. Please select "Mixer ToolBox"
multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then
you are allowed to select "Realtek HDA Primary output" to use the Rear Speaker,
Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use
the front panel audio.
Speed LED
Status
Of
Orange
Green
Rear Speaker
(No. 7)
(No. 5)
V
--
V
V
V
V
V
V
Description
10Mbps connection
100Mbps connection
1Gbps connection
Central / Bass
Line In
(No. 4)
(No. 6)
--
--
V
V
, click "Enable playback
J3710-ITX
J3160-ITX
--
--
--
V
8
Advertisement
Table of Contents
