Table of Contents
Advertisement
Available languages
Available languages
Complete Installation
1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
Check Operation of Microwave Oven
1. Fill a microwave-safe container with 1 cup (250 mL) of water
and place container on the turntable inside the microwave
oven. Close door firmly.
2. Touch COOK.
3. Set power level, temperature, and cook time to "2:00" minutes.
4. Press START.
If microwave oven does not operate, check the following:
■ Household fuse is intact and tight or circuit breaker has not
tripped.
■ Electrical supply is connected.
■ See the online "Troubleshooting".
When the display reads "1:00" minute, open the microwave
oven door. The microwave oven should stop cooking. Close
door firmly. The interior microwave oven light should turn off.
5. Touch START to resume a preset cycle. The microwave oven
should begin cooking and the microwave oven interior light
should be ON.
Let microwave oven complete cooking time. Tones will sound
at the end of the cooking time and the microwave oven will
shut off.
6. Open microwave oven door and slowly remove container.
Water in container should be hot.
7. To set the clock and other microwave oven functions, refer to
the Quick Start Guide.
If you need Assistance or Service:
Please reference the "Online Ordering Information" section of the
Quick Start Guide or contact the dealer from whom you purchased
your built-in microwave oven.
9
Advertisement
Table of Contents
