Control Panel - LG LRSES2706V/00 Owner's Manual

22 OPERATION

Control Panel

Control Panel Features
Ice Plus
This function increases both ice making and freezing capabilities. Press the Ice Plus button to
illuminate the icon and activate the function for 24 hours. The function automatically shuts off
after 24 hours. Stop the function manually by pressing the button once more.
Freezer
Indicates the set temperature of the freezer compartment in Fahrenheit (°F). The default freezer
temperature is 0°F. Press the Freezer button repeatedly to select a new set temperature from -7 °F
to 5 °F.
NOTE
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and
Freezer buttons simultaneously for approximately five seconds. The temperature indicator on the
display window switches between Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
Refrigerator
Indicates the set temperature of the refrigerator compartment in Fahrenheit (°F). The default
refrigerator temperature is 37 °F. Press the Refrigerator button repeatedly to select a new set
temperature from 33 °F to 43 °F.
CAUTION
Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
• To deactivate / activate:
- With either refrigerator door opened, press the Ice Plus button 3 times consecutively while
pressing the Refrigerator button. The control panel beeps and the temperature settings display
to confirm that Display Mode is deactivated. Use the same procedure to activate Display Mode.
NOTE
• When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
• Parts, functions, and options vary by model. Your model may not include all the Options, appears
with a different name and / or different position.