Summary of Contents for Fisher-Price DORA the EXPLORER K6672
Page 1
K6672 K6672 Please keep this instruction sheet for future reference, Please keep this instruction sheet for future reference, as it contains important information. as it contains important information. Adult assembly is required. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Consumer Information WARNING TO AVOID SERIOUS INJURY: #8 x 2¼" Screw - 1 • Adult supervision is required. .354" • Never use near cars and other motor vehicles, near streets, steps, sloped #8 x¾" Screw - 6 .354" Cap Nut - 2* driveways, hills, roadways, alleys, swimming pools or other bodies of water.
Page 3
Assembly CAUTION This product contains small parts in its unassembled state. Adult assembly is required. Straight Axle Assembly PUSH Seat Bottom View • Turn the frame upside down. • Insert the straight axle assembly through the holes in the rear of the frame. Frame •...
Page 4
Assembly Pedal Hub Pedal Axle Tab Pedal Hub • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fi t into the slot in each pedal hub. • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
Page 5
Assembly Fork Post Handlebar Front Fork Post Handlebar Back ¾" Screw ¾" Screw 2¼" Screw Fork Cover • Insert the fork post up through the hole in the neck of the • Fit the handlebar front to the fork post. frame.