Energy-Saving Cooling Mode; Display Luminosity; Setting The Current Time - LG HS-24IV Owner's Manual

Energy-Saving Cooling Mode

Energy-saving cooling mode can save energy in cooling , because it body-adaptation time according to the
change of time and temperature and adjusting automatically desired can operate efficiently by setting
temperature.

Display Luminosity

The Display Luminosity can be adjusted by using the remote control.
Press the start/stop button to start the unit. Open the door on the remote control, press the 2ndF button
and, press display luminosity button.
Display will be dark. Press the button again to set bright display.

Setting the Current Time

1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries,
you should press the RESET BUTTON to reset the time. Press the Start/Stop button.
2. Press 2nd F button and check if
3. Press the TIME SETTING BUTTONS until the desired time is set.
4. Press the TIME SET/CANCEL BUTTON.
NOTE
Check the indicator for A.M. and P.M.
1. Press the START/STOP BUTTON to start the unit.
2. Open the door on the remote controller.
Select cooling operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODEL BUTTON again and unit will operate in previous
mode(Cooling or healty dehumidification mode).
icon is on.
CANCEL
SET
Operating Instructions
Owner's Manual 13