Table of Contents
Advertisement
Carry out a final check e.g. start the machine, check it runs smoothly. On each side, check that
the spark guard is adjusted down to the stone, check the gap between the tool rest and the stone
is correct, check the stone is not badly deformed (rounded edges, grooved face, etc; unless you
have specifically shaped the stone to these profiles)check the eye shield is correctly positioned.
Have a cooling pot to hand if you need it, and remember safety goggles are a good investment
(you are only issued with 1 pair of eyes).
Code
Model
Rating
Power
Voltage
Speed
Wheel Diameter
Wheel Width
Bore
Dust Extraction Outlet
Weight
SETTING UP THE GRINDER
SPECIFICATION
107670
AP200HDS
Professional
900W
230V
2,950rpm
200mm
32mm
31.75mm(1.1/4")
40mm
28kg
09
Advertisement
Table of Contents
