Table of Contents
Advertisement
Carefully unpack the machine and all the loose items from the box. Check the contents against
the "What's in the box" list. If any items are missing please contact our technical services
department using the telephone numbers that you will find in our catalogue. Having removed
all the items from the box, please dispose of your unwanted packaging responsibly. A lot of the
packaging is biodegradable.
Remove the protective coating from all unpainted parts. This coating may be removed with a soft
cloth (do not use acetone, petrol or lacquer thinners for this purpose).
Initially we suggest that you merely carry out a 'loose' assembly of the various parts of the
grinder. After assembly has been completed we will set up the various components correctly
and tighten securely.
Identify the Tool Rests and secure them to the inside faces of the wheel covers using the star
handled bolts and washers provided. (See fig 1).
Tool rest
Fig 1
Identify the Eye shield guards, these assemblies are universal and can be fitted to either side of
the machine. Secure into the hard point the top of the stone cover part of the guard, using the M4
screws etc. provided. (See figs 2 & 3).
Fig 2
INITIAL ASSEMBLY
Star handled bolt
07
Advertisement
Table of Contents
