2.9 Security
Choose Security, and the sub-menus of Security are shown as below.
2.9.1 MAC Address Binding
Choose Security > MAC Address Binding and the following page appears. After MAC address binding is enabled
at a port, only devices whose MAC addresses are consistent with the bound MAC address can communicate
through the port. A port can be bound to a maximum of three MAC addresses.
If MAC address binding is enabled, address learning is automatically disabled and RSTP/STP is affected. It is
recommended to disable STP on the port.
The configuration procedure:
Step 1
Enter the MAC address.
Step 2
Select the port that you want to bind MAC address.
Step 3
Select Enable from the drop-down list to enable the binding service.
Click Update to apply the service of MAC address binding.
Step 4