Bush Hog HT419H Operator's Manual page 61

Mower ID#________________
Date:
Before conducting the inspection, make sure the tractor engine is off, all
rotation has stopped and the tractor is in park with the parking brake
engaged. Make sure the Tedder is resting on the ground or securely blocked
up and all hydraulic pressure has been relieved.
The Operator's Manual is in the Canister on the Hay Tedder
All Safety Decals are in place and legible
The Tongue/Hitch connection bolts & pins are tight
There are no cracks in Tongue or Hitch
There are no cracks in Loader Arms or Mounts
The Tow Chain is secured to the Tractor & Hay Tedder
Driveline / Gearbox Shields are in good condition
Driveline Clutches are in good condition, not frozen
Driveline Telescoping Members & U-Joints are lubricated
Driveline Yokes are securely attached to PTO & Tiller
Gearbox Mounting Bolts are tight
Gearbox Oil is at the proper level
The Wing connection bolts & pins are tight
Transport locks & retaining chains are in good condition
Rake spokes are in good condition & securely attached
Rake Wheels are securely attached to the frame members
The Hydraulic Cylinders are in good condition
The Hydraulic Cylinder pins are in place & retained
There are no leaking or damaged hoses
There is no evidence of hydraulic leaks
The tires & wheel(s) are in good condition
Wheel lug nuts are tight
Operator's Signature:
DO NOT OPERATE an UNSAFE TRACTOR or TEDDER
HT419H 05/22
© 2022 Alamo Group Inc.
OPERATION
Hay Tedder PRE-OPERATION Inspection
________________
Item
Operation Section 4-13
Make ____________________
Shift ____________________
Condition at Specific Comments if
Start of Shift not O.K.