ASSEMBLY
STEP "D"
Attach the parking stand (1) to drawbar (2)
fastening it with pin ((3) and clip (4).
In this step, you will use:
Item 3, one pin ø15 (ø0.59")
Item 4, one clip ø3 (ø0.12")
STEP "E"
You will find tine bars 1(RH) and 2(LH) in four
bundles (two RH and two LH) of six pieces each.
HT419H 05/22
Assembly Section 3-7
© 2022 Alamo Group Inc.