Sound - Sanyo FW65C78F Owner's Manual

Sound

Before you begin:
You must set Home in Location. L p. 35
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press Z and use J K to select Setup then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Sound, then press OK.
Auto sound
Picture
Equalizer
Sound
Balance
Features
Installation Sonic Emotion Premium
Accessibility Auto volume leveling
TV speakers
Headphone volume
Digital output format
Delta volume
4
Use H I J K to select the item you want to adjust, then press
OK.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
To set your TV to a predefined sound setting.
When you adjust the following settings
(Equalizer, Sonic Emotion Premium and Auto
volume leveling), Personal sound will be set
automatically.
Personal
Standard
Auto sound
Vivid
Sports
Movie
Music
News
Adjust the tonal quality for each frequency.
Cursor H
Equalizer
To adjust each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Cursor H
Balance
To adjust the balance of the right and left
speakers
The customized settings you
defined using the Sound menu.
For normal TV viewing.
Enhanced sound.
Clear sound for high action.
Powerful sound settings for a
cinematic experience.
Optimized for music playback.
Set the anchor's voice at a
comfortable volume.
Cursor I
Cursor I
This selects sound modes for more spatial or surround sound
reproduction.
Off
Sonic
Emotion
On
Off
Dialog
Enhancement
Sonic
On
Emotion
Premium
Off
Bass
Enhancement
On
Off
Absolute
3D Sound
On
This function keeps a constant Loudness differential between the TV
commercials and the programs.
Off
Auto volume
leveling
On
You can select the audio output from the unit's speakers or not. If
your amplifier is HDMI link function compatible and connected by an
HDMI cable to this unit, some sound operations such as volume up
can be changed by using this unit's remote control. Make sure fun-
Link control is set to On. L p. 36
Off
On
TV speakers
Speakers
fun-link
Adjust headphone volume.
Cursor H
Headphone
volume
To decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
PCM
Digital output
format
Bitstream
If a channel or input device is too loud or too soft, navigate to that
channel or input device.
Cursor H
Provides the ability to set a custom volume
level for the current channel or input source.
Delta volume
If the source volume is too loud, set a negative
value (-1 to -12)
If the source volume is too soft, set a positive
value (+1 to +12)
33
To set Sonic Emotion to off
To set Sonic Emotion to on
To set Dialog Enhancement to
off
To set Dialog Enhancement to
on
To set Bass Enhancement to
off
To set Bass Enhancement to on
To set Absolute 3D Sound to off
To set Absolute 3D Sound to on
To remove the Auto volume
leveling
To reduce volume differences
between the TV commercials
and the programs
No output sound from the unit's
speakers
To output sound from the unit's
speakers
To control audio output from your
connected HDMI-CEC compliant
devices with VOL + / – by using
this unit's remote control.
Cursor I
To output PCM format
To output audio in its native
format as Bitstream to
connected audio receiver
Cursor I
Continued on next page.
.
English