Dvd Mode Confi Guration; Tv Type; Language Setup; Osd Lang - Alba LCD32947DVDHDS Installation And Operating Instructions Manual

32” combination lcd tv/dvd
Table of Contents

Advertisement

Advanced Features
DVD Mode Confi guration
1. While in DVD source, press DISPLAY button to
access DVD Setup menu. This is only possible if there
is no playback.
2. This menu is operated using
"
" buttons.

TV Type

TV Type is only available as 'PAL'. The TV set also
supports NTSC signal; however, the signal will be
converted to PAL when it appears on the screen.

Language Setup

This menu is used for setting language preferences
in DVD mode. Language menu contents are detailed
below:

OSD LANG

You can select the default OSD language of the player
menus

AUDIO

You can select the default audio language if supported
by the DVD disc.

DISC MENU

You can select the DVD's disc menu language among
these languages. Disc menu appears in the selected
language, if supported by the DVD disc.

SUBTITLE

You can select the default subtitle language if supported
by the DVD disc.
Preferences: These are the DVD mode preferences.
Menu contents are detailed below:

DEFAULT

If you choose RESET and press SELECT, the factory-
presets are loaded. Parental level and parental
password does not change.

DOWNMIX

This mode can be selected when the digital audio output
of the TV is used.

SURROUND

Surround sound output.

STEREO

Two channels stereo.

PARENTAL

Playing some DVDs can be limited depending on the
age of users. The "Parental Control" function allows
playback limitation level to be set by the parent. Parental
36
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
" " or " "
"
" or
and
Level can be adjusted to one of the eight levels. Level
"8 ADULT" adjustment let you watch all of the DVD titles
ignoring the DVD disc's parental level. You can watch
the DVD discs, which has the same or lower parental
level than the player's level only. Menu contents are
detailed below:

PASSWORD

Using this item you can change the current password.
To change the password you will be prompted to enter
your old password. After you have entered your old
password, you can now enter the new 4-digit password.
You can use C key to delete the incorrect entry.
NOTE: Factory preset of the password is "0000".
You have to enter XXXX digital password every time
you want to change the parental level. If you forget your
password please contact technical service.

SPDIF OUTPUT

You can set Spdif Output as PCM or RAW. If you select
PCM from SPDIF Output in DVD menu and play DVD
with Dolby audio, you can get audio output with two
channels via the speakers and the SPDIF Out. If you
select RAW from SPDIF Output in DVD menu and play
DVD with Dolby audio, speakers will be muted and you
can get 5+1 Dolby audio via the SPDIF Out.

Advertisement

Table of Contents
loading

This manual is also suitable for:

529/9201

Table of Contents