Other Features Settings - Toshiba 32P2300 Series Owner's Manual

Adjusting the sound quality
You can adjust the basic sound quality.
• Use the menu: SOUND, Advanced Sound
Settings
• Use the items: Bass and Treble
• Use the button:  and 
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
• Use the menu: SOUND, Advanced Sound
Settings
• Use the item: Power Bass Booster
• Use the modes: Super, Normal and Off
Resetting the Advanced Sound Settings
• Use the menus: SOUND, Advanced Sound
Settings and Reset
• Use the item: Reset (select Yes and press OK)
Using the Dynamic Range Control
This feature allows control of compression for Dolby
Digital.
• Use the menu: SOUND
• Use the item: Dynamic Range Control
Using the Audio Distortion Control
Prevents audio distortion.
• Use the menu: SOUND
• Use the item: Audio Distortion Control
• Use the modes: On and Off
Using the Audio Level Off set
Sometimes there can be large changes in volume
when switching from an ATV channel or an external
input. Using this feature reduces these volume
diff erences.
• Use the menu: SOUND
• Use the item: Audio Level Off set
• Use the button:  and 
Using the Spectrum Analyser
Shows sound in a visual format.
• Use the menus: SOUND
• Use the item: Spectrum Analyser
Note:
The Spectrum Analyser display turns off when any
other procedure is performed.
32P2300Series̲EN.indd 16 32P2300Series̲EN.indd 16

Other features settings

Setting the On Timer and Sleep Timer
The Timer is especially useful if you want the TV to
turn itself on or off after a selected period of time.
• Use the menu: APPLICATIONS
• Use the items: On Timer and Sleep Timer
• Use the button: OK, Number buttons (0-9),  and

Confi gure the following settings in On Timer:
Enable On Timer: Select On or Off .
Input: Select an input source.
Position: Select a channel.
Volume: Select a volume.
Time Until Power On: Set a time until the timer
turns on.
After confi guring the settings, select Done and
press OK.
Press EXIT to exit the menu. Set the Standby
mode by pressing 1 on the remote control.
Note:
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically be
displayed in HDMI signal format, irrespective of the
TV's previous setting.
• Use the menu: PREFERENCES and Display
Settings
• Use the item: Auto Format
Activating Blue Screen
With the Blue Screen function On, the screen
will automatically turn blue and the sound will be
muted (except for external input) when no signal is
being received.
• Use the menu: PREFERENCES
• Use the item: Blue Screen
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you don't touch the
control buttons on the remote control or on the TV
control panel.
• Use the menu: PREFERENCES and Energy Saving
Settings
• Use the item: Automatic Power Down
Setting the No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off .
Default setting is all On.
– 16 –
2013/03/19 19:43:41 2013/03/19 19:43:41