Panasonic KX-TGF575S Quick Manual page 10

Using Bluetooth devices
Using a Bluetooth headset (optional)
By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when
talking on landline calls.
L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line
*1 You cannot use a Bluetooth headset to talk on a cellular line.
Pairing a Bluetooth headset to the base unit
1
Bluetooth headset:
Set your headset to pairing mode.
L Refer to your headset's operating instructions.
2
Handset:
{MENU}(621
3
If your headset PIN is "0000", go to step 4.
If your headset PIN is not "0000", press {CLEAR}, then enter your headset's PIN.
L Typically, default PIN is "0000". Refer to your headset's operating instructions.
4
Press {OK}, then wait until a long beep sounds. s {OFF}
L When is displayed on the base unit, the headset is available for use.
Operating a Bluetooth headset using a landline
L Refer to your headset's operating instructions for details.
L Some features described here may not be available depending on Bluetooth headset.
N Making landline calls with your headset (Base unit)
1
Press your headset's button referring to your headset's operating instructions.
2
Dial the phone number using the base unit after hearing the dial tone on your headset.
3
When you finish talking, press your headset's button referring to your headset's operating
instructions.
N Answering landline calls with your headset
To answer a landline call, press your headset's button.
When you finish talking, press your headset's button.
L If you cannot hang up the call using your headset, press {s} on the base unit 2 times.
N Switching between the base unit and your headset
You can switch between the base unit and your headset:
− during a landline call with the base unit speakerphone.
− during an intercom call between the base unit and handset.
− while listening to messages recorded on the base unit answering system.
To switch to your headset:
Press { } on the base unit.
To switch to the base unit:
Press {s} on the base unit.
*1
).
1
2
– 10 –
1
2
Pair using the handset.
Pairing