Texas Instruments bq50002 User Manual page 6

Connector and Test Point Descriptions
4.2.29 TP29 – FOD_CAL
FOD calibration.
4.2.30 TP30 – FOD_THR
FOD threshold.
4.2.31 TP31 – V_SENSE
Input voltage sense.
4.2.32 TP32 – FLIM
Leave floating to conform to WPC specification 205-kHz maximum operating frequency.
4.2.33 TP33 – ILIM
ILIM can be used to restrict the input current in order to operate with a limited input voltage source. Leave
this pin open if no fixed current limit should be used.
4.2.34 TP34 – Reserved IC Pin 5
Unused.
4.2.35 TP35 – Unused IC Pin 7
Leave this pin open.
4.2.36 TP36 – Unused IC Pin 25
Leave this pin open.
4.2.37 TP37 – Unused IC Pin 27
Leave this pin open.
4.2.38 TP38 - Unused IC Pin 17
Leave this pin open.
4.2.39 TP39 - Unused IC Pin 6
Leave this pin open.
4.2.40 TP40 - Unused IC Pin 24
Leave this pin open.
4.2.41 TP41 - Unused IC Pin 26
Leave this pin open.
4.2.42 TP42 - Unused IC Pin 18
Leave this pin open.
4.2.43 TP43 – CLK_IN
CLK_OUT signal from the internal oscillator of the bq50002.
6
bq50002 Wireless Power TX EVM
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
SLVUAJ7 – October 2015
Submit Documentation Feedback