Table of Contents
Advertisement
Controls and functions
Projector
1
2
3
4
5
6
1.
Focus ring
Adjusts the focus of the projected image.
2.
POWER indicator light
Lights up or flashes when the projector is
under operation.
3.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
4.
POWER
Toggles the projector between standby
mode and on.
5.
Left/
Starts the FAQ function.
6.
BLANK
Used to hide the screen picture.
10
Introduction
7.
TEMPerature warning light
Lights up red if the projector's
temperature becomes too high.
8.
LAMP indicator light
7
Indicates the status of the lamp. Lights up
8
or flashes when the lamp has developed a
problem.
9
9.
AUTO
10
Automatically determines the best picture
11
timings for the displayed image.
12
10.
Keystone/Arrow keys (
13
10
Manually corrects distorted images
resulting from an angled projection.
11.
Activates panel key lock.
When the On-Screen Display (OSD)
menu is activated, the #5, #10, and #11
keys are used as directional arrows to
select the desired menu items and to make
adjustments.
12.
MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
13.
SOURCE
Displays the source selection bar.
Down)
Right/
/ Up,
/
Advertisement
Table of Contents
