Video Connections; S-Video Terminal <A; Component Video Terminal <B; Composite Video Terminal (1, 2) <C - Yamaha TR-5630RDS Owner's Manual

Preparation

Video Connections

If your AV receiver has video output jacks,
connect your receiver (and then to your TV) so
that you can use one TV for several different
video sources (LD, VCR etc.) by simply switching
the input source selector of your receiver.
The player has three types of video output jacks.
Use one of them in accordance with the input
jacks of the equipment to be connected.
Y VIDEO
S VIDEO P P COAXIAL
R B
PCM
COMPONENT
VIDEO OUT
<A> <B>
S
Y P C
B B
S VIDEO COMPONENT
INPUT VIDEO IN
AV receiver
VIDEO COMPONENT
OUT VIDEO OUT
VIDEO COMPONENT
IN VIDEO IN
6
All manuals and user guides at all-guides.com
L
R
OPTICAL
DIGITAL
DTS MPEG
DIGITAL OUT AUDIO OUT
(supplied)
<C>
V
P C
R R
VIDEO
S VIDEO
OUT
S VIDEO
IN
S-Video terminal <A>
S (separate) video connection achieves a clearer
picture than composite video connection by
separating color and luminance when transmitting
signals. Use commercially available S-video cable.
Receiver (and TV) with S-video input is required.
Component Video terminal <B>
Component video connection achieves high
fidelity in reproducing colors (better performance
than S-video connection), separating video signal
into luminance (Y, terminal color-coded as green),
and color difference (Pb, blue/Pr, red). Use
commercially available coaxial cables. Receiver
(and TV) with component input is required.
Observe the color of each jack when connecting.
If your receiver does not have component output
jacks, connecting the player's component output
directly to your TV's component input can
reproduce better video image.
Composite Video terminal (1, 2) <C>
Use audio/video cable supplied with this unit
when connecting the player to a TV.
VIDEO 1, 2 jacks of VIDEO OUT output the
same signal. You can connect one to your
receiver's input using supplied Audio/Video cable,
and the other to another receiver or a TV.