Pioneer SC-LX502-S Basic Manual page 20

> Before Start > Part Names
CD
a Analog Audio Cable, b Digital Coaxial Cable
20
> Install > Initial Setup
b
a
OR
> Playback
4. Connect the Audio Component
Example of a connection with an audio component.
Connect a CD player using a digital coaxial cable or an
analog audio cable. You can also connect a turntable that
has an MM-type cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
an AUDIO IN jack other than the PHONO jack. Further, if
the turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any AUDIO IN
jack other than the PHONO jack.
If the turntable has a ground wire,
connect it to the SIGNAL GND terminal of this unit.
Turntable
> Advanced Manual
Troubleshooting | Supplementary Information, etc.