Table of Contents
Advertisement
caring for your Glide racks
caution: Handle oven racks only when they are
cool . After cooking or after the fresh-clean cycle,
racks will be very hot and can cause burns .
Important notes:
•
Remove all oven racks, including ladder racks,
before starting a clean cycle .
•
Do not use cooking oil, cooking spray, or other
oil-based lubrication products on the glide
rack extension tracks . Use only the graphite
lubrication in this area . To order graphite
lubrication, contact your installer, servicer or
dealer .
•
It is important that the parts of the rack that
contact the oven sides always have a light
coating of vegetable oil . Apply a thin layer of
vegetable oil to the sides of the rack after every
fresh-clean cycle and when the rack becomes
difficult to reposition in the oven .
to lubricate the glide rack:
1 .
Remove the rack from the oven and place the
rack on a large flat surface covered with news-
paper or scrap cloth . Fully extend the rack .
2 . Wipe away debris and crumbs from the glide
track using a cloth or sponge .
3 . Shake graphite lubrication very well before
applying . Apply to loading guides, and rotation
pin . Repeat on both sides of the glide rack .
care and cLeanInG
4 . Extend and return the glide rack several times
along the tracks to distribute the lubrication .
5 . Turn the rack upside down and apply graphite
lubrication to the insides of the loading guides .
6 . Extend and return the glide rack several times
along the tracks to distribute the lubrication .
7 .
Apply a thin layer of cooking oil to the bottom
of the "V" and the glide channels . Keeping the
frame sides lightly lubricated allows the entire
rack to slide easily when changing rack posi-
tions .
8 . Replace rack in oven right-side up .
63
Advertisement
Table of Contents
