Einstein E-Collar 800TS Owner's Manual page 16

- If the state of Momentary/Continuous Button is in Combo mode, this
button will be used as Continuous Stimulation Button.
Tapping Sensation Button "T"
- Sends education tapping sensation to the collar receiver.
Light Button(On Back) "L"
- When pressed less than 0.5 seconds, it will turn On or Off the high
intensity night tracking light which is good for finding your dog after dark.
* 1st pressing will make the collar receiver light flashing.
* 2nd pressing will make the collar receiver light turn solid.
* 3rd pressing will make the collar receiver light turn off.
* When the button is pressed, "L" will be displayed.
- When pressed for more than 2 seconds, it will turn On or Off the transmitter.
Momentary/Continuous Mode Button "M/C"
- M/C Button on the backside of the transmitter allows the user to easily
switch between the three stimulation modes.
How to Change Boosting Level
- Default boosting level is 20. Please follow the procedure below to
change the boosted level.
1. Change the mode to Momentary Mode (Press M/C button until "M" is displayed)
2. Change the intensity level to "0"
3. Press S(Black) button for more than 5 seconds to enter the Booster Level
Change Mode.
4. The intensity level display will start to blink. Rotate the dial to change the
boosted level from 1 up to 60.
BUTTON FUNCTIONS
Einstein Owner's Manual 800TS / 1200TS
15