Before Using For The First Time; Performing Initial Start-Up; Water Softening System; Overview Of Water Hardness Settings - Siemens SN67ZX48DM User Manual

Table of Contents

Advertisement

en Before using for the first time

Before using for the first time

Before using for the
first time
Configure the settings for initial start-
Before using for the first time
up.

Performing initial start-up

On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect quick start",
Page 41
Requirement: "The appliance has
been installed and connected."
→ Page 13
"Add special salt." → Page 29
1.
"Add rinse aid." → Page 30
2.
Switch on the appliance.
3.
a The display shows the settings for
initial start-up.
Press
repeatedly until the display
4.
shows the required setting.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
27 - 38
28
Hardness range
Soft
Soft
Medium
Medium
Medium
Hard
Hard
Note: If you select Initial start-up
Home Connect here, make further
settings using the Home Connect
app on your mobile device.
You can change the settings for
initial start-up and other "Basic set-
tings" → Page 39 on the appli-
ance at any time or use the
Home Connect app on your mo-
bile device.
Press
or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
approx. 3 seconds.

Water softening system

Water softening system
Hard water leaves limescale on the
Water softening system
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
repeatedly until the
Setting value
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
27 - 38
for

Advertisement

Table of Contents
loading

Table of Contents