Table Of Contents - IBM Adaptec Ultra320 SCSI User Manual

1 Introduction
Ultra320 SCSI on the Adaptec SCSI
Card 29320ALP 1-1
Device Drivers 1-3
Operating Systems 1-4
System Requirements 1-4
Understanding SCSI 1-5
SCSI IDs 1-5
Terminating the SCSI Bus 1-6
2 Using the Adaptec SCSI Card and SCSI Devices
Using SCSI Devices 2-2
Using SCSI Hard Disk Drives 2-2
Using Ultra320/160 Hard Disk Drives 2-3
Using SCSI Devices 2-3
Combining SCSI and Non-SCSI Devices 2-4
Installing Multiple SCSI Cards 2-5
Connecting the LED Connector 2-6
Overriding SCSI Termination Settings 2-7
Manual Termination 2-7
Connecting SCSI Devices 2-8
Maximum Cable Lengths 2-9
3 Configuring the Adaptec SCSI Card 29320ALP
with SCSISelect
Starting SCSISelect 3-3
Exiting SCSISelect 3-3
Using SCSISelect Settings 3-4
SCSI Bus Interface Options 3-4
Boot Device Configuration - Non-BBS Systems Only 3-5
SCSI Device Configuration Options 3-5
Advanced Configuration Options 3-7
Contents
xxxi