Replace A Cru; Base Cover Assembly - Lenovo ThinkPad T14s User Manual

Replace a CRU

Follow the replacement procedure to replace a CRU.

Base cover assembly

Prerequisite
Before you start, read Generic Safety and Compliance Notices and print the following instructions.
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
Replacement procedure
1. Disable the built-in battery. See "Disable the built-in battery" on page 31.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
Removal procedure for ThinkPad T14s Gen 2
32
T14s Gen 2 and X13 Gen 2 User Guide