Drain Connections - Bosch Benchmark SHV8PT53UC Installation Instructions Manual

Hide thumbs Also See for Benchmark SHV8PT53UC:
Table of Contents

Advertisement

Available languages

Available languages

23
Connect the dishwasher water supply line to the water shut off valve.
You will need to use an approved dishwasher water supply line with
the correct fittings for this connection. Always use the appropriate seal
when making plumbing connections.
After all connections are made, turn on the hot water and check for
leaks.
IMPORTANT NOTES about your drain connection:
If local ordinance require an air gap, install it according to the manu-
facturer's instructions.
If the dishwasher drain hose is to be connected to a disposer
dishwasher drain connection, remove the plug from the disposer's
dishwasher drain connection.
The dishwasher drain hose must have one place along its length that is
securely attached 20" (508mm) above the cabinet floor.
The drain hose length can be extended if necessary. The maximum
length of the drain hose, including the hose leading to the air gap, is
150" (3800mm).

Drain Connections

22

Advertisement

Table of Contents
loading

This manual is also suitable for:

800 series300 seriesShe53t55ucShv68tl3ucShe53tl5uc

Table of Contents