Advertisement
7. Align the contact edge of the new PCI Express Mini Card with the corresponding socket contact of the
computer (1) .
Note: If the new PCI Express Mini Card has three connectors, as in the next drawing, be sure to
attach the gray cable to the left connector, and the black cable to the right connector. If you attach
either cable to the center connector, the connection speed will be lower.
8. Pivot the card until you can snap it into place by pressing the upper side of the connectors (2) , and
secure the card with the two screws (3) . Connect the cables to the new PCI Express Mini Card (4) .
Reinstall the
keyboard.
9.
10.
Reinstall the
battery.
11. Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.
If your computer has a Multiple Input Multiple Output (MIMO) feature, a PCI Express Mini Card that has
three connectors comes with the computer. To replace the card for the MIMO feature, do as follows:
Note: The drawings shown here are for the ThinkPad T61 15.4-inch widescreen. The procedure is the
same for the ThinkPad T61 14.1-inch, T61 14.1-inch widescreen, R61 14.1-inch widescreen, and the R61
15.4-inch widescreen models.
Advertisement
