Paper Sizes - Canon GP-2000 Online Manual

Paper Sizes

Rolls
Rolls that meet the following conditions are supported.
• Outer diameter is 6.7 inches (170 mm) or less •
• Inner diameter of paper core: 2 or 3 inches •
• • Printing side out
Roll Paper Width
Roll paper width recommended for
borderless printing(*1,*2)
Minimum Paper Length
Maximum Printable Length
Thickness
*1:Borderless printing may not be available depending on the media type. For details on media types that
can be used for borderless printing, see "Paper Information List."
*2:You can perform borderless printing without specifying Roll paper width recommended for it. As
opposed to standard borderless printing, there will be a small margin on the left and right because the
paper width is set a little bit smaller than the width of the document.
Sheets
Sheets of the following sizes are supported.
Sheet Width
GP-4000 / GP-540 : 44.02 in. (1118.0 mm) to 6.00 in. (152.4 mm)
GP-2000 / GP-520 : 24.02 in. (610.0 mm) to 6.00 in. (152.4 mm)
44 in Roll (1117.6mm)
42 in Roll (1066.8mm)
B0/B1 Roll (1030.0mm)
36 in Roll (914.4mm)
A0/A1 Roll (841.0mm)
B1/B2 Roll (728.0mm)
24 in Roll (609.6mm)
A1/A2 Roll (594.0mm)
B2/B3 Roll (515.0mm)
17 in Roll (431.8mm)
14 in Roll (355.6mm)
10 in Roll (254.0mm)
4.00 in. (101.6 mm)
Excludes cloth/canvas paper.
59 feet (18 m)
depends on the OS and application.
3 mil (0.07 mm) to 31 mil (0.8 mm)
GP-4000 / GP-540 : 44.02 in. (1118.0 mm) to 6.00 in. (152.4 mm)
GP-2000 / GP-520 : 24.02 in. (610.0 mm) to 6.00 in. (152.4 mm)
81