Cook Time - Bosch NIT5668UC/01 Use And Care Manual

Table of Contents

Advertisement

Available languages

Available languages

cereals
Frying
pork chop
chicken breast
bacon
eggs
fish
pancakes
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 lb per serving)
other e.g. doughnuts (0.5 lb per serving)
Keep warm
tomato sauce
* ongoing cooking without lid
** without lid

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
Setting a cook time
The cooktop must be turned on.
Select the desired element and power level.
1.
Touch the Timer key. The
2.
element display and
‹‹
Whithin 10 seconds enter the desired cook time using
3.
the number keys.
After a few seconds the timer will start to count down.
indicator lights up in the
x
is shown in the timer display.
Changing or cancelling cook time
Select the desired element and touch the Timer key.
1.
Adjust the cook time using the number keys. To
2.
cancel cook time set the timer to
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display and the timer display shows
10 seconds. The
indicator in the element display
x
stays on.
Touch the Timer key, to turn the indicators and the beep
off.
Notes
To set a cooking time of under 10 minutes, always
touch 0 before you select the required value.
If a cooking time was set for several elements, the time
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
cooking time.
You can set a cooking time of up to
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the section on ~ "Basic settings"
Note: The cook time can be changed or cancelled for
any element:
Select the desired element and touch the Timer key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to
Power levels
2 - 3
5. - 6.
5 - 6
6 - 7
5 - 6
5 - 6
6 - 7
8 - 9
4. - 5.
1.
.
‹‹
appears in
‹‹
ŠŠ
minutes.
.
‹‹
for
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nit5668uc

Table of Contents