Technical Specifications - HP D2842 User Manual

PICTURE TUBE
INPUT SIGNAL
INTERFACE
SCANNING FREQUENCY
MAX. RESOLUTION (H
WARM-UP TIME
PIXEL CLOCK
IMAGE SIZE
POWER SOURCE
OPERATING ENVIRONMENT
CABINET DIMENSIONS
NET WEIGHT
TILT/SWIVEL STAND
1. Use the standard image sizes to avoid distortion of the displayed image.

Technical Specifications

Size
Phosphorous
Dot pitch
Face Plate
Video
Synchronization
Input Connector
Horizontal
Vertical
1600 1200 (75 Hz)
V)
30 minutes to reach optimum performance level
203 MHz
1
Standard size :350(H) x 262(V) mm
Maximum size: 365(H) x 274(V) mm
AC 90 to 264 V, 47 to 63 Hz, 140W (max), less than 8W in Suspend mode, less than 3W in Sleep mode,
less than 3W when switched Off.
Temperature
Humidity
468(H) 458(W) 479(D) mm (with stand)
24,3 kg (53.57 lbs)
Tilt Angle
Swivel Angle
HP 19" Color Monitor User's Guide
19-inch flat screen/ 18-inch viewable image
Red, Green, Blue short persistence
0.26 mm
Anti-glare, multilayer coating
0.7 Vp p analog RGB
Separated H/V (TTL level), H/V mixed (TTL level), sync-on.
green
15-pin mini D-SUB
30 to 96 kHz
50 to 200Hz
10 C to 40 C (operating)
- 20 C to +60 C (storage)
10% RH through 80% RH (without condensation)
- 5 to +13.5
45
Technical Specifications
English 15